Home / Handling / Transport conveyor / Transport conveyor TO
Transport conveyor TO
The transport belt is designed for conveying. This type is mounted under a storage hopper to unload the product. On demand, the belt can be made of PVC and PU.
The transport belt is designed for conveying. This type is mounted under a storage hopper to unload the product. On demand, the belt can be made of PVC and PU.
An extra motor can be included on demand to ensure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors. On demand, a frequency inverter is included to control the speed.
Characteristics
- Belt available in 250 – 1000 in steps of 25 cm
- An extra motor can be included on demand
- Available in various options like zinc plated steel, stainless steel, and painted mild steel
- On demand, a frequency inverter is included to control the speed
Specifications
| TO 60 | TO 80 | |
|---|---|---|
| Width of the machine (cm) | 60 | 80 |
| Length of the machine (cm) | 250 t/m 1000, steps of 25 cm | |
Options
- Material and treatment (frame)
Zinc plated steel
Frame is made from zinc plated steel. The bearings and drive/idle rollers are from mild steel
Stainless steel
Frame is made from stainless steel AISI304. The bearings and drive/idle rollers are from mild steel
Painted mild steel
Frame is made from painted mild steel. The bearings and drive/idle rollers are from mild steel
- Belt
PVC
The belt is made of PVC
Rubber
The belt is made of rubber
- Cleats size
17 x 11
The size of the cleats is 17 x 11 (W x H)
- Electrical control
No electric
Motors and necessary sensors
Stand-alone
Motors, necessary sensors and control panel. The length of the cable is 5, 10, 15 or 20 meter
Central control in line
Motors and necessary sensors
- Frequency inverter
Speed adjustment
A frequency inverter is used to control the speed
- Material and treatment (electrical panel)
Painted mild steel
The electrical panel is made from painted mild steel
Stainless steel
The electrical panel is made from stainless steel AISI304
- Support (electrical panel)
Mounted on machine
The electrical panel is mounted on the machine
Mounted on wall
The electrical panel is mounted on the wall. The length of the cable between the machine and the electrical panel is 5, 10, 15 or 20 meter
Subframe
The electrical panel is mounted on a subframe. The length of the cable between the machine and the electrical panel is 5, 10, 15 or 20 meter. The subframe is made from stainless steel AISI304, painted mild steel or galvanized steel
- Material and treatment (legs)
Stainless steel
It is made from stainless steel AISI304
Painted mild steel
It is made from painted mild steel
Galvanized steel
It is made from galvanized steel
- Height of legs
Height of legs
0 – 7 meter
- Switch
Maintenance
A maintenance switch is included
Reverse
It is used to change the direction of the belt
Start/stop
It is used to start and stop the belt
- Product sensor
Product
The product’s height is determined by the product sensor
- Bracket
Bracket
Bracket is used to mount the product sensor
- Omega drive
Omega drive
Omega drive is included to make sure the belt can move both ways
- Extra motor
Extra motor
An extra motor is included to make sure the belt can move both ways. Available options are 0.37 KW, 0.75 KW, 1.1 KW, 1.5 KW, 2.2 KW or 3 KW. If this option is selected, the originally selected power (kW) must be divided between the two motors