Home / Handling / Transport conveyor / Transport conveyor TC
Transport conveyor TC
The transport conveyor is designed for conveying. This type is our standard transport belt. On demand, the belt can be made of PVC, PU, or rubber.
The transport conveyor is designed for conveying. This type is our standard transport belt. On demand, the belt can be made of PVC, PU, or rubber. The belt can be supplied with straight cleats and the size of the cleats is 17×11 (W x H). Produce is fed onto the conveyor and is transported in the direction of belt motion.
On demand, a cover is mounted on the top and bottom of the machine. This cover can be made from galvanized steel or stainless steel. On demand, a frequency inverter is included to control the speed.
Characteristics
- Available in 20, 40, 60, 80, and 100 cm width
- Length of the belt available in 100 – 1200 in steps of 25 cm
- On demand, the type of cleats is straight 17×11
- On demand, a frequency inverter is included to control the speed
- On demand, the topside cover and bottom side cover can be made from galvanized steel or stainless steel
- Available in various options like zinc plated steel, stainless steel, and painted mild steel
Specifications
| TC 20 | TC 40 | TC 60 | TC 80 | TC 100 | |
|---|---|---|---|---|---|
| Width of the machine (cm) | 20 | 40 | 60 | 80 | 100 |
| Length of the machine (cm) | 100 t/m 1200, steps of 25 cm | 100 t/m 1200, steps of 25 cm | 100 t/m 1200, steps of 25 cm | 100 t/m 1200, steps of 25 cm | 100 t/m 1200, steps of 25 cm |
Options
- Material and treatment (cover)
Painted mild steel
Frame is made from painted mild steel. The bearings and drive/idle rollers are from mild steel
Stainless steel
Frame is made from stainless steel. The bearings and drive/idle rollers are from mild steel
Zinc plated steel
Frame is made from zinc plated steel. The bearings and drive/idle rollers are from mild steel
- Belt
PVC
The belt is made of PVC
PU
The belt is made of PU
Rubber
The belt is made of rubber
- Cleats
Straight
The type of cleats is straight
- Cleats size
17 x 11
The size of the cleats is 17 x 11 (W x H)
- Electrical control
No electric
Motors only. Wiring, additional sensors and/or control panel are not included
Stand-alone
Motors, necessary sensors, switch box and control box
Central control in line
Motors and necessary sensors
- Frequency inverter
Speed adjustment
A frequency inverter is used to control the speed
- Material and treatment (electrical panel)
Painted mild steel
The electrical panel is made from painted mild steel
Stainless steel
The electrical panel is made from stainless steel
- Material and treatment (bottomside cover)
Galvanized
A cover is mounted on the bottom of the machine, made from galvanized steel
Stainless steel
A cover is mounted on the bottom of the machine, made from stainless steel
Length of bottomside cover
0 t/m 1200, steps of 25 cm
- Material and treatment (topside cover)
Galvanized
A cover is mounted on top of the machine, made from galvanized steel
Stainless steel
A cover is mounted on top of the machine, made from stainless steel
Length of topside cover
0 t/m 1200, steps of 25 cm
- Switch
Maintenance
A maintenance switch is included
Reverse
It is used to change the direction of the belt
Start/stop
It is used to start and stop the belt
- Product sensor
Product
A product sensor is included
- Bracket
Bracket
There is a bracket included
- Extra motor
0.37 kW
An extra 0.37 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors
0.75 kW
An extra 0.75 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors
1.1 kW
An extra 1.1 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors
1.5 kW
An extra 1.5 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors
2.2 kW
An extra 2.2 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors
3 kW
An extra 3 kW motor is included to make sure the belt can move both ways. If this option is selected, the originally selected power (kW) must be divided between the two motors