Home / Handling / Transport conveyor / Transport conveyor TCH
Transport conveyor TCH
The transport conveyor is designed for conveying. This type of transport belt has high side panels. On demand, the belt can be made of PVC, PU, or rubber.
The transport conveyor is designed for conveying. This type of transport belt has high side panels. On demand, the belt can be made of PVC, PU, or rubber. Belts can be supplied with straight and round welded cleats. The shape of the cleats is 15×15.
On demand, a cover is mounted on the top and bottom of the machine. This cover can be made from galvanized steel or stainless steel. On demand, a frequency inverter is included to control the speed.
Characteristics
- Available in 20, 40, 60, 80, 100 and 120 cm width
- Belt available in 100 – 2500 in steps of 25 cm
- On demand, cleats can be straight or round welded
- On demand, the topside cover and bottom side cover can be made from galvanized steel or stainless steel
- On demand, a frequency inverter is included to control the speed
- Available in various options like zinc plated steel, stainless steel, and painted mild steel
Specifications
| TCH 20 | TCH 40 | TCH 60 | TCH 80 | TCH 100 | TCH 120 | |
|---|---|---|---|---|---|---|
| Width of the machine (cm) | 20 | 40 | 60 | 80 | 100 | 120 |
| Length of the machine (cm) | 100 t/m 2500, steps of 25 cm | |||||
Options
- Material and treatment (frame)
Zinc plated steel
Frame is made from zinc plated steel. The bearings and drive/idle rollers are from mild steel
Stainless steel
Frame is made from stainless steel AISI304. The bearings and drive/idle rollers are from mild steel
Painted mild steel
Frame is made from painted mild steel. The bearings and drive/idle rollers are from mild steel
- Belt
PVC
The belt is made of PVC
PU
The belt is made of PU
Rubber
The belt is made of rubber
- Cleats
Straight
The type of cleats is straight
- Cleats shape
15 x 15
The shape of the cleats is 15 x 15
- Electrical control
No electric
Motors and necessary sensors
Stand-alone
Motors, necessary sensors and control panel. The length of the cable is 5, 10, 15 or 20 meter
Central control in line
Motors and necessary sensors
- Frequency inverter
Speed adjustment
A frequency inverter is used to control the speed
- Material and treatment (electrical panel)
Painted mild steel
The electrical panel is made from painted mild steel
Stainless steel
The electrical panel is made from stainless steel AISI304
- Material and treatment (bottomside cover)
Zinc plated steel
A cover is mounted on the bottom of the machine, made from zinc plated steel. The length of the bottomside cover is 0 t/m 2500, steps of 25 cm
Stainless steel
A cover is mounted on the bottom of the machine, made from stainless steel AISI304. The length of the bottomside cover is 0 t/m 2500, steps of 25 cm
- Material and treatment (topside cover)
Zinc plated steel
A cover is mounted on top of the machine, made from zinc plated steel. The length of the topside cover is 0 t/m 2500, steps of 25 cm
Stainless steel
A cover is mounted on top of the machine, made from stainless steel AISI304. The length of the topside cover is 0 t/m 2500, steps of 25 cm
- Switch
Maintenance
A maintenance switch is included
Reverse
It is used to change the direction of the belt
Start/stop
It is used to start and stop the belt
- Product sensor
Sensor
The product’s height is determined by the product sensor
- Bracket
Bracket
Bracket is used to mount the product sensor
- Motor on top
On top
The motor is placed on top of the machine
- Omega drive
Omega
Omega drive is included to make sure the belt can move both ways
- Extra motor
Extra motor
An extra motor is included to make sure the belt can move both ways. Available options are 0.37 KW, 0.75 KW, 1.1 KW, 1.5 KW, 2.2 KW or 3 KW. If this option is selected, the originally selected power (kW) must be divided between the two motors
- Waste collection – chute
Chute
A waste chute is included on the end of the belt. The chute will guide waste to a transport conveyor or box